Basic Info.
Type
Multi-Function Beauty Equipment
Application
Salon, Home, Commercial Use
After-Sales Service Provided
Video Technical Support
Feature
Dark Circles, Wrinkle Remover
Product Name
Cdt Carboxytherapy Machine
Feature 1
Anti-Hair Removal;Dark Circles;Anti-Puffiness
Product Description
Product Description
Carbon dioxide therapy(CDT) is a procedure which is very similar to mesotherapy. It consists of intradermal or subcutaneous injections of medical grade CO2 using 30 G needles. CO2 insufflation has been widely used in the last 8 years in South America and in particular in Brazil for cosmetic purposes,such as stretch marks, cellulite, localized adiposities and under-eye dark circles, in combination with other minimally invasive aesthetic procedures. The low morbidity, high level of patient tolerance and minimal side effects makes it a very interesting technique in our battery of face and body rejuvenation techniques, with a high level of patient satisfaction.
Carboxytherapy has also been used in the medical field for over 80 years, in Angiology, Phlebology, Endocrinology, and Dermatology to treat diseases: ischemic lower limbs pathologies, diabete ulcers, microvascularization diseases (Raynaud phenomenon ...). Carboxytherapy has also been used recently on Psoriasis disease with interesting results .
Fast facts About
· Carboxytherapy is treatment for cellulite, stretch marks, and dark under-eye circles.
· It originated in French spas in the 1930s. · The treatment can be applied to the eyelids, neck, face, arms, buttocks, stomach, and legs.
· It uses infusions of carbon dioxide, a naturally occurring gas in the body.
Safety
· Carboxytherapy is approved by the U.S. Food and Drug Administration (CE). · It has no lasting side effects.
Convenience
· It's a quick, 15- to 30-minute outpatient procedure.
· You can return to normal routines immediately, aside from swimming and bathing in a tub for 24 hours after treatment for cellulite or fat reduction.
Cost
· Most people need 7 to 10 sessions.
· Each session costs approximately $75 to $200.
What is it Carboxytherapy used to treat? Carboxytherapy can be used to treat cellulite, dark under-eye circles,wrinkles, and stretch marksPeople who undergo the procedure find an improvement in:
· circulation
· skin elasticity
· fine lines and wrinkles
It also aids with collagen repair and the destruction of fatty deposits.
Additionally, it can help reduce under-eye circles by increasing blood flow to the eyelid. Some physicians have also used the therapy to treat erectile dysfunction, acute arthritis, Raynaud's syndrome, and alopecia caused by poor blood circulation.
For fat and cellulite reduction, the procedure is often preferred over more invasive and high-risk methods, such as liposuction.
Carboxytherapy can be used on the face, eyelids, neck, stomach, arms, legs, and buttocks.
Application:
· Eye rejuvenation
· Under eye dark circles
· Eye wrinkles
· Fatty prolapse
· Stretch Marks
· Skin Elasticity Improvement
· Various Scars (Surgical, Atrophic, Acne - - - etc.)
· Localized Fat Reduction
CDT operation steps
1. Set up :unscrew the host shell, FixtheC2pgas tank into the host and tighten to the limit then mount the shell ;Install the filter into the needle cartridge connector ;Insert the needle above the filter complete machine installation
2. Turn on :Turn the pressure regulator toward the direction of "+" Thepressure meter pointer will move to the green position.It means the instrument can start normally working
3. Testing:Please press theC2Pinjection button with your thumb ,Inject into the water cup observe if the bubbles in the water bubble at a moderate speed . 4. Turn off : After normal operation,tightened thepressure regulator toward the direction of "-" ,it means thedevice has been successfullyturned off
Company Profile
FAQ
How much does it cost? People usually require 7 to 10 treatments of carboxytherapy, spaced out 1 week apart, before they begin to see results. Each treatment can cost between $75 and $200 depending on the provider. How long does a typical treatment session last?The average carboxytherapy treatment takes approximately fifteen to thirty minutes to complete. This depends on the treatment area, the under eye area for example, could take as little as 5 minutes. How often does one have to go for treatments? Depending on how bad your skin condition is , you would go for a series of treatments ranging fom 2-6 treatments.
Is it permanent? Unfortunately not, the effects last from 6-18 months , and thereafter one would have to go for touch ups.
Side effects and recovery period?On the eye area there could be a chance of swelling and minimal bruising, but this settles quickly. On larger areas like thighs ,buttocks and stomach there could be more severe marks. The treatment is virtually painless, or so I read.Supply Ability
Supply Ability
100000 Set/Sets per Month
Packaging & Delivery
Packaging DetailsCarton NEW CDT CO2 carboxytherapy skin care beauty machine ON promotion
Portshanghai/guangzhou
Lead Time:Quantity(Sets) | 1 - 1 | >1 |
Est. Time(days) | 3 | To be negotiated |
Address:
Science and Innovation Center of Economic Develpment Zone, Wujin District, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Agriculture & Food
Company Introduction:
We are a professional MANUFACTURER established in2010. Originally worked on manufacturing mini CO2 cylinder and related products. A specialized designer and manufacturer of miniature steel cylinders and developer of product series, changzhou fairdale Metal Tools Co., Ltd. Rose in the late 1990s. A2dhering to the operation principle "customers come before everything else and quality first", advancing in a pioneering and enterprising spirit and pursuing excellency, the company has now developed into an enterprise with quite a great research and development ability and production capacity. The miniature steel cylinders and mainly used on export-oriented drinking water machines, red wine machines, tire aerating tools, air conditioner(tiny piping) cleaners, lifesaving appliances, fire apparatuses, etc. Currently the company is developing new product series: Carbonized water jugs, argon and laughing gas cylinders, tire aerating tools, etc. Which are all vacancy products in the country. Over 20 million reliable cylinders are made by FD and in service all over the world. We donate ourselves into the research and development of cylinders and valves since 2000, aiming to provide excellent quality products for beverage, scuba, medical, fire safety and special industry. We put our customer to our top priority, so it′s easy to do business with us through smooth communication. We keep seeking better ways of working, and be innovative in new product development, production technique and managing system. We gained a lot from cohesive team working, which finally benefits our customers.